On small farms and backyard homesteads, the conversation keeps circling back to electrified chicken netting. I’ve walked too many dawn patrols after a raccoon raid to count—and, to be honest, most of the fixes are simple: robust mesh, correct earthing, a reliable energizer, and consistent maintenance. The hardware matters. Especially the wire.
Industry chatter this year? Higher zinc coatings, tighter apertures near the ground, and hybrid setups—energized perimeter with hex mesh skirts to stop diggers. Solar energizers are standard now; battery backup is practically expected. Many customers say the difference shows up after the first wet week: consistent pulse, low leakage, no floppy mesh at corners. It seems obvious, but the mesh is the backbone.
Origin: East side of Baoheng Road, Zhaobazhuang Village, Tangfeng Town, Shenzhou City, Hengshui City, Hebei Province. Built for poultry yards, garden perimeters, and orchard skirts, this mesh earns its keep when paired with a certified energizer and proper insulators. In fact, with decent grounding, electrified chicken netting cuts nighttime losses dramatically (anecdotal, but consistent across growers I speak with).
| Parameter | Typical Spec (≈, real-world use may vary) |
|---|---|
| Mesh aperture | 1/2", 1", 1.5" hex |
| Wire diameter | 0.7–1.0 mm (≈ 21–19 ga) |
| Coating options | Heavy zinc (EN 10244 class), hot-dip; PVC-coated over zinc |
| Tensile strength | ≈ 350–550 MPa (per wire grade) |
| Electrical resistance | ≈ 0.03–0.08 Ω/m (galvanized steel wire) |
| Roll height/length | 0.9–1.8 m high; 25–50 m rolls |
| Service life | ≈ 5–10 yrs (coastal vs. inland, maintenance-dependent) |
Certification note: energizers should comply with IEC/EN 60335-2-76 or UL 69. The mesh itself isn’t “energizer-certified,” but meeting wire and coating standards keeps performance predictable when energized.
| Vendor | MOQ | Custom sizes | Coating choices | Lead time | Support |
|---|---|---|---|---|---|
| Tikemetal (Hebei) | Around 50–100 rolls | Yes (aperture, height, selvedge) | Heavy zinc, PVC over zinc | ≈ 2–4 weeks | Tech guidance + test data |
| Local distributor A | Low | Limited | Standard zinc | In stock | Basic |
| Import brand B | Medium | Yes (surcharge) | Zinc/PVC | 4–6 weeks | Documentation-focused |
Popular customizations: 1/2" lower band with 1" above, PVC green for landscape blending, heavier-gauge top line for tautness. Customers report fewer “mystery shorts” after upgrading to heavier zinc plus tidy corner bracing. Surprisingly, even a small tweak—better ground—can halve the pulse loss.
Match mesh specs to ASTM/EN wire norms, and always pair with energizers certified to fence-safety standards. Keep vegetation off hot lines, check voltage weekly, and—yes—close the gate.
RELATED PRODUCTS
Top
